Fuji Electric micrex-sx NP1F-MP1, Руководство пользователя

Страница: 96 / 250

5-41
5-3 I/O Area of NP1F-MP2
) t c e t e d l a n g i s Z - e s a h P : e m a n l a n g i S ( 6 t i B
<Description>
• In the pulse generation mode or position command mode, this signal becomes “1” when an effective phase-Z
signal is detected after the phase-Z signal detect command has become “1.”
While this signal is “1,” the deviation amount data when phase-Z was detected or the lower word of the current
value counter when phase-Z was detected is output in current value data area 2. (Output data is selected by Latch
Data Output Select.)
When the phase-Z signal detect command has become “0,” this signal becomes “0,” and current value data area 2
returns to the current value counter upper word output mode.
(For details, refer to the paragraph for phase-Z signal detect command.)
) t c e t e d n o i t i s o p t p u r r e t n I : e m a n l a n g i S ( 7 t i B
<Description>
• In the pulse generation mode or position command mode, this signal becomes “1” when the interrupt signal is
detected after the interrupt position detect command has become “1.” While this signal is “1,” the deviation amount
data when the interrupt signal was detected or the lower word of the current value counter when the interrupt
signal was detected is output in current value data area 2. (Output data is selected by Latch Data Output Select.)
When interrupt position detect command becomes “0,” this signal becomes “0,” and current value data area 2
returns to the current value counter upper word output mode.
(For details, refer to the paragraph for interrupt position detect command.)
) d e s u t o N : e m a n l a n g i S ( 8 t i B
<Description>