Fuji Electric micrex-sx NP1F-MP1, Руководство пользователя

Страница: 4 / 250

Safety Precautions
Caution
◊
Do not use one found damaged or deformed when unpacked, otherwise, failure or erratic operation might be caused.
◊
Do not shock the product by dropping or tipping it over, otherwise, it might be damaged or troubled.
◊
Follow the directions of the operating instructions when mounting the product. If mounting is improper, the product
might drop or develop problems or erratic operations.
◊
Use the rated voltage and current mentioned in the operating instructions and manual. Use beyond the rated values
might cause fire, erratic operation or failure.
◊
Operate (keep) in the environment specified in the operating instructions and manual. High temperature, high humidity,
condensation, dust, corrosive gases, oil, organic solvents, excessive vibration or shock might cause electric shock, fire,
erratic operation or failure.
◊
Select a wire size to suit the applied voltage and carrying current. Tighten the wire terminals to the specified torque.
Inappropriate wiring or tightening might cause fire, malfunction, failure, or might cause the product to drop from its
mounting.
◊
Contaminants, wiring chips, iron powder or other foreign matter must not enter the device when installing it, otherwise,
erratic operation or failure might occur.
◊
Remove the dust-cover seals of modules after wiring, otherwise, fire, accidents, failure or fault might occur.
◊
Connect the ground terminal to the ground, otherwise, an erratic operation might occur.
◊
Periodically make sure the terminal screws and mounting screws are securely tightened.
Operation at a loosened status might cause fire or erratic operation.
◊
Put the furnished connector covers on unused connectors, otherwise, failure or erratic operation might occur.
◊
Install the furnished terminal cover on the terminal block, otherwise, electric shock or fire might occur.
◊
Sufficiently make sure of safety before program change, forced output, starting, stopping or anything else during a run.
The wrong operation might break or cause machine problems.
◊
Engage the loader connector in a correct orientation, otherwise, an erratic operation might occur.
◊
Before touching the PC, discharge any static electricity that may have been collected on your body. To discharge it,
touch a grounded metallic object. Static electricity might cause erratic operation or failure of the module.
◊
Be sure to install the electrical wiring correctly and securely, observing the operating instructions and manual. Wrong or
loose wiring might cause fire, accidents, or failure.
◊
When disengaging the plug from the outlet, do not pull the cord, otherwiase, break of cable might cause fire or failure.
◊
Do not attempt to change system configurations (such as installing or removing I/O modules) while the power is ON,
otherwise, failure or erratic operation might occur.
◊
Do not attemp to repair the module by yourself contact your Fuji Electric agent. When replacing the batteries, correctly
and securely connect the battery connectors, otherwise, fire, accidents or failure might occure.
◊
To clean the module, turn power off and wipe the module with a cloth moistened with warm water. Do not use thinner or
other organic solvents, as the module surface might become deformed or discolored.
◊
Do not remodel or disassemble the product, otherwise, a failure might occur.
◊
Follow the regulations of industrial wastes when the device is to be discarded.
◊
The modules covered in these operating instructions have not been designed or manufactured for use in equipment or
systems which, in the event of failure, can lead to loss of human life.
◊
If you intend to use the modules covered in these operating instructions for special applications, such as for nuclear
energy control, aerospace, medical, or transportation, please consult your Fuji Electric agent.
◊
Be sure to provide protective measures when using the module covered in these operating instructions in equipment
which, in the event of failure, may lead to loss of human life or other grave results.
◊
External power supply (such as 24V DC power supply) which is connected to DC I/O should be strongly isolated from
AC power supply.