Flintec FT-10 FILL, Техническое руководство

Страница: 83 / 131

FT-10 Fill Technical Manual, Rev. 2.21, July 2020 Page 82 of 131
40100 R 1
Voltage of
Power Supply
Voltage of power supply is indicated with 0.1 V
increment.
e.g.: 23.4 VDC is indicated as integer 234 value.
40101 R 2
Ton/hour
indication
40103 R 10 Not used
40113 R 1
Process
Warning
Messages
Dec Description
0 No process error
1 END
2-3 Not used
4 RESET
Process
Error Messages
128 E GATE
129 E TRNG
130 E TARE
131 E ZERO
132 E ZRNG
133 FiLL t
134 E VALV
135 E HOLE
136 Not used
137 NO FEED
40114 R 1 Process state
0 No Process (ADC out, Over, Under, etc.)
1 Ready
2 In filling process
3 End of filling (FULL)
4 In discharging process
42000 R/W
1 Filter Refer to parameter [120] on page 34
42001 R/W
1 Not used
42002 R/W
1 Zeroing Range Refer to parameter [203] on page 35
42003 R/W
1 Auto Zero Tracking Refer to parameter [204] on page 35
42004 R/W
1 Tare Refer to parameter [205] on page 35
42005 R/W
1 Motion Detector Refer to parameter [206] on page 35
42006 R/W
2 Not used
42008 R/W
2 Capacity Refer to parameter [212] on page 35
42010 R/W 1 Decimal point
Dec Description
0 XXXXOO
1 XXXXXO
2 XXXXXX
3 XXXXX.X
4 XXXX.XX
5 XXX.XXX
42011 R/W 1 Increment
Dec Description
1 X 1