FT-10 Fill Technical Manual, Rev. 2.21, July 2020
Page 45 of 131
6.2 Mode 2: Open Container Filling as Net
Typical Application
•
Open container filling.
•
Filling in to big bag.
Operation
•
Filling starts with Start Input or automatically
and is executed as 2 speeds directly into a
container.
•
Process ends after removing the container from
the platform.
Mode Related Filling Parameters
The mode related filling parameters shall be entered before start up the filling. Please enter the values
below carefully for better filling performance of the filling machine
.
Display
Operation
[
123.456
kg ]
Press long
key, [
tArE_ _
] message appears.
[
tArE _ _
] [XXXXX]
Minimum tare value.
Filling can start if the weight of the container
is bigger than this value. Enter minimum tare value by pressing
and
keys. Press the
key to go to the next
parameter.
[
tArE ¯ ¯
] [XXXXX]
Maximum tare value.
Filling can start if the weight of the
container is lower than this value. Enter maximum tare value by
pressing
and
keys. Press the
key to go to the
next parameter.
[
d_
FıLL
]
[XXXXX]
Filling Start delay.
This parameter delays the feeding after
applying start input or automatic start. Enter start delay value by
pressing
and
keys. Press the
key to the next
parameter. Maximum value is 9.9 seconds. Default is 0.0 seconds.
[
d_Strt
] [XXXXX]
Auto start control delay.
This parameter delays after weight
bigger than minimum tare value and filling starts automatically at
the end of this delay. Enter the value by pressing
and
keys. Press the
key to go to the next parameter. Maximum
value is 9.9 seconds. Default is 0.0 seconds.
[
S_tYPE
] [ XXXXX
]
Start type.
0 = Manual. Filling starts by input or fieldbus.
1 = Automatic. Filling starts when weight is bigger than Minimum
tare value.
Enter Start type by pressing
and
keys. Press the
key to go back to the operation. Default is 0.
Note:
For
TARGET
and
TOLERANCE
entry please see section 7, page 69
