Extreme Networks BlackDiamond 10808, Руководство по установке оборудования

Страница: 150 / 424

Extreme Networks Power Supply Units for BlackDiamond Switches
Extreme Networks Consolidated ExtremeXOS Hardware Installation Guide
150
Front Panel LEDs
The front panel of the Extreme Networks 700/1200 W AC PSU provides status LEDs. Table 19 describes
the LED behavior on the front panel.
Table 19: Extreme Networks 700/1200 W AC PSU front panel LED behavior
The front panel on each Extreme Networks 700/1200 W AC PSU contains two cooling fans as shown in
Figure 87 . Airflow enters from the front vents on the Extreme Networks 700/1200 W AC PSU and exits
to the rear vents of the switch. Airflow through the Extreme Networks 700/1200 W AC PSU AC is
independent from the airflow that exists through the rest of the switch.
The AC input is located on the switch directly in back of each power supply bay. The front of the
Extreme Networks 700/1200 W AC PSU has a handle with a lever mechanism for both insertion and
removal as shown in
Figure 88 .
Power Supply Cords
Extreme Networks 700/1200 W AC PSU(s) come with both 110 V AC and 220 V AC power supply
cords. The 110 V AC power supply cord allows for a maximum DC output power of 700 W. The 220V
AC power supply cord allows for a maximum DC output power of 1200 W.
CAUTION
All power supply cords provided by Extreme Networks are designed for use in North America only. Power supply
cords for use outside of North America are typically provided by a third-party distribution center and must meet the
following requirements:
●
Power supply cords must be agency certified for country of use.
●
Power supply cords must contain an IEC 320 C13 connector on the end of the PSU.
●
Power supply cords must contain an appropriately rated and approved wall plug applicable to the
country of installation.
●
Power supply cords must be less than 5 m long.
●
Wire size must be a minimum of 16 AWG (1.0 mm
2
) copper-stranded.
PSU Condition
Power
Green
Predictive Fail
Amber
Fail
Amber
Power supply AC outputs working normally On Off Off
AC input power present/standby output on Blinking Off Off
Current limit on 48 VDC output On Off Blinking
Predictive failure On Blinking Off
No input power to this PSU only Off Off On
No input power to any PSU Off Off Off
Power supply failure Off Off On