84
Expression Show Control System
Modifying groups
The
PSC allows you to modify groups in Blind or Stage modes though the
process is different for each.
Modifying groups in Blind
Follow these steps to modify a group in Blind:
1.
Press [Blind]
.
2.
Press [Group] to indicate that you are entering a group.
3.
Enter the group number you want to modify.
4.
Press [Enter]
.
Warning: If you do not press [Enter] after [Group], the PSC displays the
current look as it is being modified by the group. To modify the group, you
must press [Group], enter the group number, and then press [Enter].
5.
Set or modify channel levels
. Use [Full] to set levels to their full recorded
levels, [At] to set them at a percentage of the recorded levels, or the level
control strip to control levels incrementally.
6.
Press [Rec] [Enter].
Modifying groups in Stage
To add a look to a group in Stage follow these steps:
1.
Press [Stage].
2.
Press [Group] to indicate that you are entering a group.
3.
Enter the group number you want to modify.
4.
Set or modify channel levels
. Use [Full] to set levels to their full recorded
levels, [At] to set them at a percentage of the recorded levels, or the level
control strip to have incremental control of levels.
5.
Press [Rec] [Group].
6.
Enter the group number you are modifying.
7.
Press [Enter].
