74
Expression Show Control System
Recording modified cues
The difference between Record and Track is apparent when you modify a cue or
insert a new cue between two existing cues
. Record and Track produce different
results.
The following keys were pressed to release captured channels and play back
cue 1.
[Stage] [Rel] [Rel]
Release captured channels.
[Cue] [1] [Go]
Play back cue 1.
[Chan] [1] [At] [5] [0]
Modify channel 1 to 50 percent.
With cue 1 in a fader, channel 1 is modified to 50 percent
. To change a channel
level that affects only the cue you modify, use [Rec]
. Modify the cue; press
[Rec]; enter the cue number, and press [Enter]
. Only the current cue is modified.
The track that encompasses the channel is interrupted but continues in the
following cues at the originally tracked level.
The results of modifying cue 1 and using [Rec] are illustrated in Figure 2.
Cue 1
Cue 2
Cue 3
Cue 4
Cue 5
Channel 1
50
FF
FF
25
00
Channel 2
FF
FF
FF
00
Channel 3
FF
FF
00
Channel 4
FF
00
Channel 5
Figure 2.
Note that channel 1 is not affected in cues 2 and 3
. Also note that when you
record a modified cue that is in a fader, the changes are reflected in the fader
.
That is, when you release the channels you have modified, they remain on
stage.