128
Expression Show Control System
Back
[Back] lets you replay previously played cues. The back key replays the most
recently played cue, regardless of the order in which the cues were recorded in
the cue sheet. It then plays subsequent cues in reverse numerical order. For
example, if you play cues one, two, three, twenty-two, and sixteen, then press
[Back], cue sixteen will fade into cue twenty-two. If you press [Back] again, cue
twenty-one will play, not cue three.
Back allows you to play back cues loaded in any fader. If you are using only one
fader, you need only press [Back] to replay the previous cue. If you have cues
loaded into more than one fader, you must press [Back] then the [Go] button
below the desired fader. If you play cues one, two and three in the AB fader and
cues six, seven and eight in the CD fader, pressing [Back] then the AB [Go]
plays back cue two; pressing [Back] then the CD [Go] plays back cue seven.
Cues are played back using the fade and wait times recorded with the cue.
If you press [Back], then decide not to use the function, press [Back] again to
exit Back mode.
Note: Each time you press [Back], the PSC resets the cue sheet. The cue
replayed with Back becomes the first cue in the cue sheet. If you then press
[Go] without first pressing [Back], the next cue in numerical sequence plays.
Example
[Cue] [1] [Go] plays cue one.
[Go] plays cue two.
[Go] plays cue three.
[Cue] [2] [2] [Go] plays cue twenty-two.
[Cue] [1] [6] [Go] plays cue sixteen.
[Back] [Go] plays cue twenty-two.
[Back] [Go] plays cue twenty one.
[Back] [Go] plays cue twenty.
