Chapter 8 Reference
187
Time
When you are recording or modifying cues, [Time] lets you modify cue upfade,
downfade and wait times.
To modify fade and wait times, follow these steps:
1.
Press [Cue] and enter the cue number you want to modify.
2.
Press [Time].
3.
Enter upfade time in minutes and seconds (00:00) or seconds and frames
(00.00), then press [Enter]. Cue fade times can range from one frame
(00.01) to 99:59 minutes. (Thirty frames equal one second.)
Note: Enter a colon between minutes and seconds; enter a decimal point
between seconds and frames.
4.
Enter downfade time, then press [Enter]. You can enter time in minutes
and seconds (00:00) or seconds and frames (00.00).
5.
Enter wait time. You can enter time in minutes and seconds (00:00) or
seconds and frames (00.00).
Cue wait time is the length of time between the
beginning
of the upfade
and the
beginning
of the downfade.
Example
[Cue] [1] [Time] [5] [Enter] [Enter] [1] [0] enters up and downfade times of 5
seconds and a wait time of 10 seconds.
[Cue] [1] [Time] [.] [2] [Enter] [Enter] [.] [2] [5] enters up and downfade times of
two frames and a wait time of 25 frames.
