28
Expression Show Control System
8.
Use the arrow keys as described below to edit macros, if necessary.
Left and right arrows
Move highlight to left or right
.
Up arrow
Inserts keystroke before highlighted keystroke.
Down arrow
Deletes highlighted keystroke.
Note: You can also use [Del] to delete the highlighted keystroke.
Macro wait
To program a pause in the macro, press [Macro wait]
. The PSC displays
Macro-wait 00:00
. Enter the length of the pause in minutes and seconds
(00:00) or seconds and frames (00.00). Pauses can be any length of time
from one frame (00.01) to 99:59 minutes
. (One second equals thirty
frames.)
Note: Enter a decimal point between seconds and frames.
9.
Touch [Enter Macro] to save the macro
. Each macro has a 32 keystroke
limit
.
10. Enter another macro or edit an existing macro by following steps four
through nine. Or, return to another mode by touching the appropriate key.
Hint: If you need to exceed the 32 command limit, link another macro to
the end by entering another macro number as the last command, and
finish entering commands in the linked macro.
Deleting regions
To delete a region, follow these steps:
1.
Press [Set Up].
2.
Select 12,
Clear Designer’s Workspace
, and press [Enter].
3.
To clear a range of regions, enter the first number you want to clear, and
press [Enter]. Then enter the last region number you want to clear, and
press [Enter].
Press [0], and press [Enter] to clear all regions.
4.
Press [Enter] to complete the command, or press [Clear] to cancel it.
Note: Clearing Designer’s Workspace does not clear macros not associ-
ated with regions.
