ETC Element Classic, Руководство пользователя

Страница: 123 / 687

System Basics 109
•
Green - Playback faders
•
Orange - Presets and palettes
Text Indicators
•
+ (see cue 6) - Indicates that there is discrete timing within the associated cue. Found in
the cue display “Timing” area.
•
* (see cue 4) - Indicates the cue has an allfade command. Found in the cue display
“Flags” area.
•
* - Indicates a link to a non-existent cue. Found in the cue display "Link" area.
•
D - Indicates a dark move, a cue that has any non-intensity parameters moving on
channels whose intensity is at 0. Found in the cue display “Flags” area in the move
column.
•
x - Indicates that a mark has been placed, but the mark is broken.
•
A or a (see cues 3 & 4) - Indicates an asserted cue. “A” indicates the entire cue is
asserted. “a” indicates a channel or parameter assert only. Found in the cue display
“Flags” area.
•
B or b (see cues 2 & 5) - Indicates a blocked cue. “B” indicates the entire cue is blocked.
“b” indicates a channel/ parameter block only. Found in the cue display “Flags” area.
•
F1 - F10 - Indicate faders numbered 1 through 10 on the console. Found at the bottom
of the fader display.
•
> - Indicates a cue with a follow or hang time. Found to the left of the cue number.
•
F5 (see in cue 1) - Indicates a follow time associated with the cue (in this case, 9
seconds). Found in the cue display.
•
H3 (see cue 2) - Indicates a hang time associated with the cue (in this case 4 seconds).
Found in the cue display.
•
I - Indicates an intensity blocked cue. Found in the cue display “Flags” area.
•
L - Indicates a live move. A “+” is used to show that both types of moves are in that cue.
•
M or m (see cue 1) - Indicates a marked cue. “M” indicates an AutoMark or a reference
mark that is used by a subsequent cue. “m” indicates a reference mark that is currently
unused by any subsequent cue (see
About Mark (on page 262) ). Found in the “Flags”
area.
•
P (see cue 3) - Indicates the cue will preheat. Found in the cue display “Flags” area.
•
R (see cue 8) - Indicates the source cue which refers back to an earlier mark (see
Referenced Marks (on page 263)
). Found in the cue display “Flags” area.
•
Number in the FX column (see in cue 1) - Indicates a cue level effects override.
•
M1(see in cue 3) - Indicates a linked macro.
•
Q2/1 (see in cue 6) - Indicates a linked cue.
•
S1 (see in cue 1) - Indicates a linked string. The string will display here.
•
Relay 1/1 (see in cue 8) - Indicates a linked relay.
Note:
The playback status display will show a red counter for sneak time.
Note:
If any show control options are currently enabled in Setup>System>Show
Control, they will display at the top of the Playback Status Display.
For more details on information contained in the playback status display, see
Playback Status
Display (on page 106)
.