ETC Element Classic, Руководство пользователя

Страница: 610 / 687

596 Ion Classic User Manual
MIDI Raw
Also known as MIDI Strings, MIDI Notes, MIDI Messages, or Channelized Event Data. Originally
intended for communication between musical instruments, MIDI has been adapted for a
variety of uses between devices. Eos Family consoles can send or receive MIDI messages
through the built-in MIDI ports (when available).
Net3 Show Control Gateways do not support MIDI RAW Note On/Off, Program Change, and
Control Change functions. Those functions are only supported through the local I/O cards.
System exclusive (SysEx) messages, including MSC, do work with a Show Control Gateway.
Receiving MIDI
Eos Family consoles can be configured to respond to specific MIDI messages or messages
matching a specific pattern. These are configured in an Event List in the Show Control Display.
Strings are configured in the MIDI String configuration display, shown below:
MIDI Message Types
The following MIDI messages can be received:
•
MIDI Note Events (Note On/Note Off)
•
Program Change Events
•
Control Change Events
•
System Events (MIDI Show Control)
MIDI Note Events (Note On/Note Off)
Note On and Note Off commands simulate activating (on) and releasing (off) a musical note.
The MIDI data that is expected to be received is shown above the Note selection area, with ‘N’
shown where any valid number will be considered a match. This display will change as
configuration options are selected. When finished configuring a Note On or Note Off event,
press {OK} to store the event. Otherwise, press {Cancel} to undo the changes.
Message Structure
Note On has a structure of 9A CC DD, where 9 represents the Note On command, A represents
the channel number, CC represents the note value, and DD represents the velocity.