ENSONIQ MR Rack, Руководство музыканта

Страница: 297 / 314

Chapter 9 —Supplemental Information
ENSONIQ MR-Rack Musician’s Manual 67
Range:
0 to 116
Chorus Depth
Dete r mines the amount by which the Global Cho r us ’ s cente r delay time sho r tens and
lengthens. V alues r un f r om 0 ( 0.0 Hz ) to 127 ( 25.0 Hz ) .
Range:
0 to 250
Chorus Center
Dete r mines the cente r delay time o f the two delays within the Global Cho r us. V alues
r un f r om 0 ( 0.0 Hz ) to 127 ( 25.0 Hz ) .
Range:
0 to 500
Chorus Spread
Dete r mines the amount o f ste r eo imaging in the Global Cho r us.
Range:
0 to 10
Chorus Phase
Enables/disables the synch r onization o f the Global Cho r us ’ s pai r o f delays as they
t r avel f r om thei r sho r test length to longest. 0 causes the delays to change togethe r ; 1
causes one delay to sho r ten while the othe r lengthens, and vice ve r sa.
Range:
0, 1
Insert
T he f ollowing pa r amete r s apply to the cu rr ent Pe r f o r mance ’ s I nse r t E ff ect.
Insert Routing
T he f ollowing pa r amete r s dete r mine what happens to Sounds di r ected to the I nse r t F X Bus
and designate an I nse r t Cont r ol Pa r t.
Input Mix
Sets the wet/d r y balance between the d r y signal r outed to the I nse r t F X Bus and the
output o f the I nse r t E ff ect.
Range:
0 to 127
Chorus Mix
Dete r mines the amount o f Global Cho r us added to the I nse r t E ff ect by setting a wet/d r y
balance between the output o f the I nse r t E ff ect being sent into the Global Cho r us and
the output o f the Global Cho r us.
Range:
0 to 127
Reverb Amount
Dete r mines the amount o f the Global R eve r b added to the I nse r t E ff ect by ad j usting the
amount o f the I nse r t E ff ect being sent into the Global R eve r b.
Range:
0 to 127
Insert Type
a r ead-only display listing the I nse r t E ff ect r et r ieved with the cu rr ent Pe r f o r mance a f te r
a Unisyn Get Patch command is pe r f o r med.
Range:
r ead-only
Note:
I nse r t E ff ects can be assigned to a Pe r f o r mance only in the M R - R ack itsel f .
Once the Pe r f o r mance has been assigned an I nse r t E ff ect, executing a Get Patch
command in Unisyn will r et r ieve the Pe r f o r mance with its I nse r t E ff ect, which will be
displayed in this r ead-only f ield in the Unisyn Pe r f o r m Edito r .