Endress+Hauser Micropilot FMR56, Руководство по эксплуатации

Страница: 133 / 198

Micropilot FMR56, FMR57 FOUNDATION Fieldbus Operating menu
Hauser 133
Additional information This parameter defines up to which distance the new mapping is to be recorded. The
distance is measured from the reference point, i.e. from the lower edge of the mounting
flange or the threaded connection.
For reference purposes the Present mapping parameter (→  132) is displayed
together with this parameter. It indicates up to which distance a mapping has already
been recorded.
Record map 
Navigation  Setup → Record map
Prerequisite Confirm distance (→  131) = Manual map or Distance too small
Description Start recording of the map.
Selection • No
• Record map
• Overlay map
• Factory map
• Delete partial map
Factory setting No
Additional information Meaning of the options
• No
The map is not recorded.
• Record map
The map is recorded. After the recording is completed, the new measured distance and
the new mapping range appear on the display. When operating via the local display,
these values must be confirmed by pressing .
• Overlay map
The new mapping curve is generated by overlaying the old and the current envelope
curves.
• Factory map
The factory map stored in the ROM of the device is used.
• Delete partial map
The mapping curve is deleted up to Mapping end point (→  132) .