Endress+Hauser Micropilot FMR56 Скачать руководство пользователя страница 61

Страница: 61 / 198

Micropilot FMR56, FMR57 FOUNDATION Fieldbus

Integration into a FOUNDATION Fieldbus network

Hauser

Integration into a FOUNDATION Fieldbus

network

9.1

Device Description (DD)

You require the following to configure a device and integrate it into an FF network:

• An FF configuration program

• The Cff file (Common File Format: *.cff)

• The device description (DD) in one of the following formats

– Device Description format 4 : *sym, *ffo

– Device Description format 5 : *sy5, *ff5

Information on the device-specific DD

Manufacturer ID

0x452B48

Device Type

0x1028

Device Revision

0x01

DD Revision

Information and files at:
•

www.endress.com

•

www.fieldbus.org

CFF Revision

9.2

Integration into the FOUNDATION Fieldbus network

• For more in-depth information on integrating the device into the FF system, see the

description for the configuration software used.

• When integrating the field devices into the FF system, make sure you are using the

right files. You can read out the required version by means of the Device Revision/

DEV_REV and DD Revision/ DD_REV parameters in the Resource Block.

The device is integrated into the FF network as follows:

1. Start the FF configuration program.
2. Download the Cff and device description files (*.ffo, *.sym (for format 4) *ff5, *sy5

(for format 5) to the system.

3. Configure the interface.
4. Configure the device for the measuring task and for the FF system.

9.3

Device identification and addressing

FOUNDATION Fieldbus identifies the device using its ID code (Device ID) and automatically

assigns it a suitable field address. The identity code cannot be changed. The device appears

in the network display once you have started the FF configuration program and integrated

the device into the network. The blocks available are displayed under the device name.
If the device description has not yet been loaded, the blocks report "Unknown" or "(UNK)".

Содержание Micropilot FMR56







































































































































































































Результаты поиска

Содержание Micropilot FMR56

Отзывы:

Похожие инструкции для Micropilot FMR56

Бренды по названию

Популярные бренды

Endress+Hauser Micropilot FMR56, Руководство по эксплуатации

Результаты поиска

Содержание Micropilot FMR56

Отзывы:

Похожие инструкции для Micropilot FMR56

Бренды по названию

Популярные бренды