Endress+Hauser Micropilot FMR56 Скачать руководство пользователя страница 137

Страница: 137 / 198

Micropilot FMR56, FMR57 FOUNDATION Fieldbus

Operating menu

Hauser

137

17.3.3 "Advanced setup" submenu

Navigation



Setup → Advanced setup

Locking status

Navigation

 Setup → Advanced setup → Locking status

Description

Indicates the write protection with the highest priority that is currently active.

User interface

• Hardware locked

• Temporarily locked

Additional information

Meaning and priorities of the types of write protection

•

Hardware locked (priority 1)

The DIP switch for hardware locking is activated on the main electronics module. This

locks write access to the parameters.

•

SIL locked (priority 2)

The SIL mode is activated. Writing access to the relevant parameters is denied.

•

WHG locked (priority 3)

The WHG mode is activated. Writing access to the relevant parameters is denied.

•

Temporarily locked (priority 4)

Write access to the parameters is temporarily locked on account of internal processes in

progress in the device (e.g. data upload/download, reset etc.). The parameters can be

modified as soon as the processes are complete.

On the display module, the -symbol appears in front of parameters that cannot be

modified since they are write-protected.

Access status tooling

Navigation



Setup → Advanced setup → Access stat.tool

Description

Indicates access authorization to parameters via operating tool (e.g. FieldCare).

User interface

• Operator

• Maintenance

• Service

Additional information

The access authorization can be changed via the

Enter access code

parameter

(→  138).
If additional write protection is active, this restricts the current access authorization

even further. The write protection status can be viewed via the

Locking status

parameter (→  137).

Содержание Micropilot FMR56







































































































































































































Результаты поиска

Содержание Micropilot FMR56

Отзывы:

Похожие инструкции для Micropilot FMR56

Бренды по названию

Популярные бренды

Endress+Hauser Micropilot FMR56, Руководство по эксплуатации

Результаты поиска

Содержание Micropilot FMR56

Отзывы:

Похожие инструкции для Micropilot FMR56

Бренды по названию

Популярные бренды