Endress+Hauser Micropilot FMR56, Руководство по эксплуатации

Страница: 63 / 198

Micropilot FMR56, FMR57 FOUNDATION Fieldbus Integration into a FOUNDATION Fieldbus network
Hauser 63
9.4 Block model
9.4.1 Blocks of the device software
The device has the following blocks:
• Resource Block (device block)
• Transducer Blocks
– Setup Transducer Block (TRDSUP)
– Advanced Setup Transducer Block (TRDASUP)
– Display Transducer Block (TRDDISP)
– Diagnostic Transducer Block (TRDDIAG)
– Advanced Diagnostic Transducer Block (TRDADVDIAG)
– Expert Configuration Transducer Block (TRDEXP)
– Expert Information Transducer Block (TRDEXPIN)
– Service Sensor Transducer Block (TRDSRVSB)
– Service Information Transducer Block (TRDSRVIF)
– Data Transfer Transducer Block (TRDHROM)
• Function Blocks
– 2 AI Blocks (AI)
– 1 Discrete Input Block (DI)
– 1 Multiple Analog Output Block (MAO)
– 1 Mutliple Discrete Output Block (MDO)
– 1 PID Block (PID)
– 1 Arithmetic Block (AR)
– 1 Signal Characterizer Block (SC)
– 1 Input Selector Block (ISEL)
– 1 Integrator Block (IT)
– 1 Analog Alarm Block (AAL)
In addition to the pre-instantiated blocks already mentioned, the following blocks can also
be instantiated:
• 3 AI Blocks (AI)
• 2 Discrete Input Blocks (DI)
• 1 PID Block (PID)
• 1 Arithemetic Block (AR)
• 1 Signal Characterizer Block (SC)
• 1 Input Selector Block (ISEL)
• 1 Integrator Block (IT)
• 1 Analog Alarm Block (AAL)
Up to 20 blocks can be instantiated in the device altogether, including the blocks already
instantiated. For instantiating blocks, see the appropriate Operating Instructions of the
configuration program used.
Hauser Guideline BA00062S.
The guideline provides an overview of the standard function blocks that are described
in FOUNDATION Fieldbus Specifications FF 890 - 894. It is designed to help operators
use the blocks implemented in the Hauser field devices.