Endress+Hauser Micropilot FMR56 Скачать руководство пользователя страница 169

Страница: 169 / 198

Micropilot FMR56, FMR57 FOUNDATION Fieldbus

Operating menu

Hauser

169

Additional information

Meaning of the options

•

Cancel

No action is executed and the user exits the parameter.

•

Execute backup

A backup copy of the current device configuration in the HistoROM (built-in in the

device) is saved to the display module of the device.

•

Restore

The last backup copy of the device configuration is copied from the display module to the

HistoROM of the device.

•

Duplicate

The transmitter configuration is duplicated to another device using the transmitter

display module. The following parameters, which characterize the individual measuring

point are

not

included in the transmitted configuration:

Medium type

•

Compare

The device configuration saved in the display module is compared to the current device

configuration of the HistoROM. The result of this comparison is displayed in the

Comparison result

parameter (→  169).

•

Clear backup data

The backup copy of the device configuration is deleted from the display module of the

device.

While this action is in progress, the configuration cannot be edited via the local

display and a message on the processing status appears on the display.
If an existing backup is restored to a different device using the

Restore

option, it may

occur that some device functionalities are no longer available. In some cases even a

device reset will not restore the original status.
In order to transmit a configuration to a different device, the

Duplicate

option should

always be used.

Backup state

Navigation



Setup → Advanced setup → Conf.backup disp → Backup state

Description

Displays which backup action is currently in progress.

Comparison result

Navigation

 Setup → Advanced setup → Conf.backup disp → Compar. result

Description

Displays the comparison result between the device and the display.

Содержание Micropilot FMR56







































































































































































































Результаты поиска

Содержание Micropilot FMR56

Отзывы:

Похожие инструкции для Micropilot FMR56

Бренды по названию

Популярные бренды

Endress+Hauser Micropilot FMR56, Руководство по эксплуатации

Результаты поиска

Содержание Micropilot FMR56

Отзывы:

Похожие инструкции для Micropilot FMR56

Бренды по названию

Популярные бренды