Endress+Hauser Micropilot FMR56, Руководство по эксплуатации

Страница: 18 / 198

Incoming acceptance and product identification Micropilot FMR56, FMR57 FOUNDATION Fieldbus
18 Hauser
For an overview of the scope of the associated Technical Documentation, refer to the
following:
• The W@M Device Viewer : Enter the serial number from the nameplate
( www.endress.com/deviceviewer )
• The Hauser Operations App : Enter the serial number from the nameplate or
scan the 2-D matrix code (QR code) on the nameplate.
4.2.1 Nameplate
20
21
22
24
25
23
26
1
2
3
4
5
6
7
8
9
10
19
18
17
16
15
14
Ext. ord. cd.:
Order code:
Ser. no.:
T max =
p
LN =
Mat.:
Date:
FW: Dev.Rev.:
Ta:
if modification
see sep. label
X =
MWP:
12
11
47 (1.85)
92 (3.62)
mm (in)
13
A0019444
 4 Nameplate of the Micropilot
1 Device name
2 Address of manufacturer
3 Order code
4 Serial number (Ser. no.)
5 Extended order code (Ext. ord. cd.)
6 Process pressure
7 Antenna length (only for FMR51 with antenna extension)
8 Certificate symbol
9 Certificate and approval relevant data
10 Degree of protection: e.g. IP, NEMA
11 Document number of the Safety Instructions: e.g. XA, ZD, ZE
12 Data Matrix Code
13 Modification mark
14 Manufacturing date: year-month
15 Temperature resistance of the cable
16 Geräterevision (Dev.Rev.)
17 Additional information about the device version (certificates, approvals, communication): e.g. SIL, PROFIBUS
18 Firmware version (FW)
19 CE mark, C-Tick
20 Profibus PA: Profil-Version; FOUNDATION Fieldbus: Device ID
21 Material in contact with process
22 Permitted ambient temperature (T
a
)
23 Size of the thread of the cable glands
24 Maximum process temperature
25 Signal outputs
26 Operating voltage
Only 33 digits of the extended order code can be indicated on the nameplate. If the
extended order code exceeds 33 digits, the rest will not be shown. However, the
complete extended order code can be viewed in the operating menu of the device:
Extended order code 1 to 3 parameter