Endress+Hauser Gammapilot M FMG60, Руководство по эксплуатации

Страница: 10 / 104

Identification Gammapilot M FMG60 PROFIBUS PA
10 Hauser
2.4 Supplied documentation
2.4.1 Operating Instructions (BA00329F/00/EN)
Describe how to install and commission the Gammapilot M (communication version
PROFIBUS PA). Those functions of the operating menu are included, which are required for
standard measuring tasks. Any additional functions are contained in the "Description of
Device Functions" (BA00287F/00/EN).
2.4.2 Description of Device Functions (BA00287F/00/EN)
Contains a detailed description of all the functions of the Gammapilot M and applies for all
communication versions. This document can be found as a PDF file on the CD-ROM supplied
and can be downloaded from the Internet under "www.de.endress.com" (

download).
2.4.3 Safety instructions
Additional safety instructions (XA, ZE, ZD) are supplied with certified device versions. Refer
to the nameplate for the names of the safety instructions that apply to your device variant.
An overview of the certificates and approvals can be found in TI00363F/00/DE, chapter
"Certificates and approvals".
2.5 Certificates and approvals
CE mark, declaration of conformity
The device is designed to meet state-of-the-art safety requirements, has been tested and left
the factory in a condition in which it is safe to operate. The device takes into account
applicable standards and regulations which are listed in the EC declaration of conformity
and thus meets the legal requirements of the EC Directives. Hauser confirms the
successful testing of the device by affixing to it the CE mark.
2.6 Registered trademarks
PROFIBUS
®
Registered trademark of the PROFIBUS User Organization, Karlsruhe, Germany
ToF
®
Registered trademark of Hauser GmbH+Co. KG, Maulburg, Germany