Endress+Hauser Gammapilot M FMG60, Руководство по эксплуатации

Страница: 22 / 104

Wiring Gammapilot M FMG60 PROFIBUS PA
22 Hauser
Terminal(s) Meaning
0 Grounding of the cable screen 1)
1) Rated cross section > 1 mm 2 (17 AWG)
1, 2 Power supply
2)
2) Rated cross section max. 2.5 mm 2 (14 AWG)
Compartment 2:
3, 4
Compartment 1:
(3)
1
,(4)
1
Signal output, depending on communication version:
• 4-20mA with HART
• PROFIBUS PA
• Foundation Fieldbus
(Depending on the device version ordered, the signal output is in connection compartment 1
or 2, see below)
NOTICE
For the versions of the Gammapilot M with fieldbus plug connectors (M12 or 7/8"), the
signal output is wired in compartment 2 on delivery and connected to the fieldbus plug
connector (see below, section "Fieldbus connectors"). In this case, the housing needs
not to be opened for connecting the signal line.
5, 6 Pulse input (for cascading mode; is used for master and slave)
7, 8 Pulse output (for cascading mode; is used for slave and end slave)
9, 10, 11, 12 PT-100 input (4-wire)
13 Plug for display and operating module VU331 (normally in FHX40);
is wired on delivery and connected to the FHX40 plug
14 Protective earth

)
15 Protective earth or grounding of the cable screen
 )
The cables used at terminals 14 or 15 must at least have the same cross section as the
cables at terminals 1 and 2.