Endress+Hauser Gammapilot M FMG60, Руководство по эксплуатации

Страница: 33 / 104

Gammapilot M FMG60 PROFIBUS PA Operation
Hauser 33
5.2.2 The operating menu
Function code
The functions of the Gammapilot M are arranged in an operating menu. To ensure easy
orientation within the menu, a unique position code is indicated on the display for each
function. This code consists of one alphabetic and two numeric characters.
A0019876-EN
1 Measuring mode
2 Function group
3 Function
• The alphabetic character specifies the current measuring mode of the Gammapilot M:
– L : level
– S : limit (switch)
– D : density
– C : concentration
– * : no measuring mode selected yet
• The first numeric character identifies the function group:
– basic setup *0
– calibration *1
– Safety settings *2
– ...
• The second numeric character numbers the individual functions within the function group:
basic setup *0
– today's date *01
– beam type *02
– isotope *03
– operating mode *04
– ...
Hereafter, the position is always given in brackets after the function name. " * " (not yet
selected) is always indicated as the measurement method, e.g. "present date" (*01) .
1 2 3