59
InStallatIon anD oPeratIon manual
25-15049-G
October 2021 www.eaton.com
12. Commissioning
Access Level 4 (Engineer)
Level 4 functionality can be accessed by the following procedure:
1. Log in to the Engineer user.
2. Open the front door. (This triggers the tamper switch on PSE Backplane
but a fault will not be raised).
A level 4 user has access to all the functionality of 3, as well as:
1. Commissioning -> Reset Alarm Counter
2. Commissioning -> CAN Bus Addressing (assign logical CAN addresses to
cards on CAN bus)
12.2.2 Manage Users
The Manage Users function allows the user to manage the following settings for
users:
•
Change Username
•
Change PIN
•
Change Access Level
•
Enabled/Disabled
•
View Last Login time and date
Manage Users is part of System Settings.
Initially, at the point of system installation, the only user Enabled will be Engineer.
The Engineer user can then set up and enable users according to the customer
requirements.
The user must first select which user they wish to manage:
xDetect
9999 9999 9999 9999 9999
2
Panel 2
19:09
23/8/21
Alarm Count: 99999
Choose User
Username 1
Username 6
Username 7
Username 8
Username 9
Engineer
Username 5
Username 2
Username 3
Username 4
