Dräger Savina 300, Техническая документация инструкция, Страница: 69 / 166

Savina 300
No
.1
309
_0
00
000
12
27
_Pu
bl
ic
ati
o
n
69
Maintenance instructions
Replacing the consumables in the O2 gas inlet
Fitting
1. Insert the filter ( Fig. 71 /1) in the O2 gas inlet.
2. Insert the sealing ring ( Fig. 70 /1) in the O2 gas inlet.
3. Use the screws ( Fig. 69 /1) to secure the connector plate ( Fig. 69 /2) to the
O2 gas inlet.
4. Insert the washer ( Fig. 68 /1) in the O2 gas inlet.
5. Push the seal ( Fig. 67 /1) onto the connector plate.
6. Screw the connection ( Fig. 66 /1) onto the O2 supply block with a tighten-
ing torque of 20 Nm +/-2 Nm using a torque spanner and insertion tool
(size 22 mm).
7. Fit the rear panel, see also „Disassembling/assembling the device“ sec-
tion headed „Rear panel“.
8. Re-attach removed tubing and connectors to the appropriate connections
on the Savina 300.
9. Fit the filter cover, see also „Disassembling/assembling the device“ sec-
tion headed „Filter cover“.
10. Perform the „electrical safety test“ and „function tests“ as per the test
instructions.
Fitting of the consumables is complete.