Dräger Savina 300 Скачать руководство пользователя страница 14

Страница: 14 / 166

.13

_00

122

ati

Savina 300

Function descriptions

Electronic assembly

Front processor

The front processor has the following tasks:

–

Interface with the display processor

–

Monitoring of the master processor and display processor

–

Monitoring of the input logic and the data e.g. the pixel sum

The RAM caches data from the front processor.

The EEPROM with socket of the front processor stores safety parameters,
set values such as volume, software options and the operating hours.

Display processor

The display processor has the following tasks:

–

Presentation of curves and parameters on the display, LEDs

–

Input and operator data (keyboard, rotary encoder, touchscreen)

–

Collation of data such as the pixel sum.

The EEPROM of the display processor stores user-specific display settings,
such as measured value positions.

Flash EEPROMs

The device's operating system program (software) is stored in Flash
EEPROMs (rewritable memory modules).

Real-time clock

The real-time clock generates the time and date information. The real-time
clock has an internal battery.

The Central Control Board incorporates the following functions:

–

Processing of the signals from the sensors (O2, flow, pressure, tempera-
ture)

–

Control of the blower and valves

–

Monitoring of the unit functions and the supply voltages

–

Actuation of the displays

–

Keypad interpretation

–

Provision of the internal and external interfaces

–

Set values such as the volume

Mains power failure alarm

If the mains power fails, the device switches to the internal batteries which
supply the device with power. If the internal batteries are discharged and the
device has no external batteries, an acoustic alarm is sounded with a Gold-
Cap and a horn.

Содержание Savina 300







































































































































































Результаты поиска

Содержание Savina 300

Отзывы:

Dräger Savina 300, Техническая документация инструкция, Страница: 14 / 166

Результаты поиска

Содержание Savina 300

Отзывы: