Operating Instructions
© Copyright by Markem-Imaje CSAT GmbH
ITS6_135_Manual_EN.doc
Subject to Technical Modifications
Page 351 / 370
edged, however in this event the manufacturer will accept no liability or
guarantee. The respective owner would bear all risks solely.
Components that need to be reconditioned should always be returned in
their custom packaging to the manufacturer Markem-Imaje CSAT GmbH.
Information
Return the dismantled components exclusively in their customized
packaging and fill out the accompanying return receipt carefully and
completely, since fast processing cannot be guaranteed without a
precise reason for the return.
– Non-observance of these require-
ments can result in the loss of all warranty rights!
After the reconditioning of the component in question, Markem-Imaje CSAT
GmbH grants a warranty for the next interval of use. If a part should exhibit
a defect as a result of a production error before the scheduled time period
expires, the costs of materials for the subsequent repair will be calculated
proportionate to the actual service life achieved. The basis for assessment
of the costs incurred are the replacement part and consumable part lists
valid at the time of the repair. 70 % of the recommended replacement inter-
val is used as a basis.
This guarantee covers only the material costs of the part in question but
does not cover any consequential costs incurred by the premature defect,
for instance for production losses or delivery delays. The costs for any ser-
vice technicians required must be carried by the user proportionate to the
actual service life.
If a component is used beyond the service life indicated in the replacement
schedule, this is done at the sole risk of the machine owner. The warranty
for full and proper functioning cannot be granted by Markem-Imaje CSAT
GmbH until after reconditioning.
