Docomo FOMA D901i, Руководство пользователя, Страница: 97 / 596

95
Making
/Receivin
g
Vid
e
o-pho
ne C
a
lls
Switching the camera to Macro Mode (Close-up Mode)
Switching over to Macro Mode will allow you to adjust the focus when sending images of objects about
7 to 11 cm away.
･
You can switch the camera to Macro Mode only when the out-camera is being used.
1
Press
m33
during a call.
■
Resetting to the standard mode.
a
Press
m33
.
Transmitting tone signals [ Send DTMF ]
The tone signals (DTMF) are transmitted during a call.
･
The signals may not be received depending on the device of receiver side.
･ DTMF input is available only while your image or substitute image being sent or using Chara-
den during a video-phone call.
1
Press
m8
during a video-phone call and press the dial keys.
The number you pressed is displayed and the tone signal is transmitted.
･
To cancel transmitting tone signals (DTMF), press
c
.
･
The tone signals (DTMF) are transmitted only by pushing dial keys even if you do not push
m
8
while your image is being sent.
Default Normal mode
INFORMATION
● If you switch the camera to the in-camera in Macro Mode, the camera returns to the standard mode.
INFORMATION
● If the tone signals (DTMF) are transmitted, the frame selection and image selection are canceled.