Docomo FOMA D901i, Руководство пользователя

Страница: 242 / 596

240
i-m
o
d
e
Changing certificate host [ Certificate Host ]
If you use services from other than FirstPass, set the connection destination. If you change this setting,
you cannot connect to the FirstPass center.
･
You cannot make this setting during i-mode connection.
1
Press
d86
on the stand-by display.
2
Select HOST field and press
2
.
3
Select User host field and enter the connection destination.
･
User host can contain up to 99 one-byte alphanumeric characters.
4
In the same way as Step 3, enter User host URL.
･
User host URL can contain up to 100 one-byte alphanumeric characters.
5
Press
p
.
Using FirstPass
●
FirstPass is DoCoMo’s electronic authentication service. Using FirstPass allows client authentication, in
which a site and the FOMA terminal exchange and verify each other’s certificate for authenticating each
other.
●
FirstPass is possible to be used for Internet communication from the FOMA terminal and for Internet
communication in the condition the FOMA terminal is connected to a PC. To use FirstPass with a PC,
FirstPass PC software in the attached CD-ROM is needed.
●
Before requesting a user certificate, be sure to read “FirstPass Usage Note” displayed on the screen and
accept the terms and conditions.
●
Use of a user certificate requires entry of the PIN2 code.
☛
P152
●
All operations made after the entry of the PIN2 code are regarded as operations you made. Use
abundance of caution not to let the UIM or PIN2 code used by any third party.
●
If the UIM is lost or stolen, you can have the user certificate nullified at a DoCoMo Shop.
●
In no circumstances shall DoCoMo be put under any obligation by or held responsible for sites and
information provided by FirstPass compatible sites. Any issue that arises must be settled between you
and the FirstPass compatible site concerned.
●
Neither DoCoMo nor the certifier provides any guarantee for security, etc. in use of FirstPass or SSL. Use
the services on your own judgment and responsibility.
Default Host: DoCoMo
Usually, you do not need to change this setting.
･
Press
1
and go to Step 5 to restore settings for connecting to
FirstPass.