Docomo FOMA D901i, Руководство пользователя, Страница: 481 / 596

479
Data Co
mm
unic
a
tio
n
* PC with a USB port (conform to USB specification 1.1/
2.0) is required in case of USB connection.
Before installation/uninstallation
･
Installing and uninstalling the communication
configuration file or FOMA PC configuration
software under Windows XP or 2000 can only be
performed by a user with administrator privileges.
Attempting by other user produces an error. For
details on PC administrator privileges, contact
your PC manufacturer or Microsoft Corporation.
･
Before starting operation, make sure that no other
program is running. If there is any active program,
save and exit the program before operation.
･
Also, refer to the instruction of the PC.
Connecting PC to FOMA terminal
The connection should be made with the PC and
FOMA terminal both switched ON.
･
Be sure to install the communication configuration
file (driver) before connecting with a PC in
communication mode for the first time.
☛
P480
･
When FOMA terminal is connected with a PC in
miniSD mode for the first time, the OS installs the
driver automatically. Installation of the
communication configuration file on a PC is not
required beforehand. However, the OS which
support miniSD mode are Windows XP and 2000
only.
Selecting PC operation during USB
connection [ USB Mode Setting ]
Whether to perform data communication via PC or
operate the data of the miniSD memory card
attached with FOMA terminal from PC at the time of
connection of PC and FOMA terminal is specified.
1 Press
m654
on the
stand-by display.
2 Press
1
or
2
.
3 Select “Yes”.
Connecting using FOMA USB cable
a
Open the cap on FOMA’s external
connection terminal.
b
Insert one end of the FOMA USB
connection cable into FOMA terminal
external connection terminal until it clicks.
Item Requirements
Computer*
PC/AT compatible computer
OS The Japanese version of
Windows 98, Me, 2000, XP
Memory
requirements
Windows 98, Me: 32MB or more
Windows 2000: 64MB or more
Windows XP: 128MB or more
Hard disk capacity 5MB or more free disk space
Default Communication mode
Communication mode
: In this mode, data communication is
performed from PC.
miniSD mode
: In this mode, the miniSD memory card attached
with FOMA terminal is operated from PC.
INFORMATION
● Even when FOMA terminal is connected with
PC, this function setting can be changed.
●
MiniSD mode may not be set if the PC is set to
start data communication automatically when
FOMA terminal is connected.
● When the miniSD memory card is being
operated from a PC, the mode cannot be set
for communication mode. Also, miniSD mode
cannot be set during a call or i-mode.
● To edit data such as phonebook entries using
PC, the data link software is required.
☛
P550
● Even when miniSD mode is set, USB Mode
Settings are switched automatically to
communication mode 90 seconds after the last
access to the miniSD memory card without
connecting FOMA terminal to PC.
● Communication such as phone call or i-mode
can not be used when miniSD mode is set.
●
Multi-indicator blinks during miniSD mode.
● Formatting miniSD memory card attached with
FOMA terminal from PC may become unable to
read or write by FOMA terminal. Format using
FOMA terminal.
☛
P397
● Click on the task tray and click “USB 大容
量記憶装置デバイス−ドライブ (E:) を安全に
取り外します
(Release safety the USB large
memory device-DriveE: *)” to quit operation of
the miniSD memory card.
* The character to be assigned to a drive varies
with the system of PC.
●
The miniSD memory card folder structure
during operation from PC.
☛
P388
Next