Docomo FOMA D901i, Руководство пользователя

Страница: 485 / 596

483
Data Co
mm
unic
a
tio
n
Installing FOMA PC configuration software
･
When “W-TCP environment configuration
software” (herein after referred to as old “W-TCP
configuration software”) and “FOMA data
communication configuration software” (herein
after referred to as old “FOMA data
communication configuration software”) provided
with FOMA terminals listed below are installed,
uninstall these software in advance.
(FOMA N2001, FOMA N2002, FOMA P2401,
FOMA P2002, FOMA F2611, FOMA T2101V)
･
Before operation, read “Before installation/
uninstallation”
☛
P479
Installing the software under
Windows XP
･
The screen differs under OS other than
Windows XP.
1
Insert the attached CD-ROM into the PC.
2
Click “ スタート ” menu and click
“ ファイル名を指定して実行 ”. Enter
“<CD-ROM drive>: ￥ FOMA_PCSET ￥
SETUP.EXE” in “ 名前 ” and click “OK”.
3
Click “ 次へ (Next)”.
A confirmation screen of the product license
agreement appears.
4 Read the content of the screen and click
“
はい ” if you agree to the license
agreement.
5 Check that “ タスクトレイに常駐する
(Reside in task tray)” is selected and
click “
次へ ”.
The “W-TCP
設定
(W-TCP setup)” resides in the
task tray after the setup.
☛
P490
･
Residing in task tray is the recommended
setting for optimum control of “W-TCP
communication” setting and cancellation.
･
You can change the setting of resident
software after the installation.
6 Check the installation path and click “ 次
へ ”.
7
Check the name of the program folder
and click “
次へ ”.
8 Click “ 完了 (Done)”.
The “FOMA PC configuration software” is
started up.
･
Settings can be started from this screen.
☛
P484
INFORMATION
● When FOMA terminal is detected as number
larger than COM20 during an APN Setting,
APN information cannot be obtained or written.
Example
INFORMATION
● The screen to select how to install FOMA PC
configuration software is displayed when it is
already installed. Follow the instructions
shown on the screen.
Next