Docomo FOMA D901i, Руководство пользователя

Страница: 329 / 596

327
i
-α
pp
li
4
Press
p
.
･ When “
α
ppli stand-by display” is set to “Yes”, a confirmation screen is displayed asking
whether to cancel the current stand-by display setting.
Setting lighting and vibrator during software running [ Light/Vibrate Setting ]
1
Press
m324
on the stand-by display.
Start from mailer : Used to set whether to start the software from mail (i- α ppli To).
Start from external : Used to set whether to start the software from external devices (i-
α
ppli
To).
Allow ring tone/image changes by software*
: Specifies whether to allow the software to change the settings of ring
tones or images on the screen such as the stand-by display.
･
If “Yes” is set, the ring tone and image of the stand-by display are
changed automatically.
Confirm every set-up*
: Specifies whether to display a confirmation screen each time the settings
of ring tones or images are changed.
Allow access to phonebook/dial record by software*
: Specifies whether to allow the software to refer to the phonebook or call
history.
･
If “Yes” is set, the phonebook or call history is referred automatically.
* This setting is available only for i-
α
ppli DX.
･
You cannot select the item not supported by the software.
INFORMATION
●
When software that connects to networks for communication is set as the i- α ppli stand-by display,
communication may automatically be carried out depending on the software.
●
Depending on this setting, network communication from software and icon information (unread mail,
remaining battery level,etc.) may not be able to be used.
●
Connection to networks requires communication fee. Please note that software automatically makes
connection if a setting is made to allow communication.
●
Note that if you set “No” for Set NW transmission, the software may not be started and timely information
such as stock prices or weather forecast may not be provided by the software.
●
If “Yes” is set for “Use icons” for the i- α ppli stand-by display, information of icons for unread mail, unread
Message R/F, remaining battery level, Silent Mode, and icons within service area/outside service area
may be sent to IPs (information service providers) through the Internet, which may give the information
to a third party.
●
While Privacy Mode is ON (“Authorized access” set for i- α ppli), the i- α ppli stand-by display does not
start even if it is set.
Setting display light
Default Use phone setting
Next