Delta Electronics DVP15MC11T, Руководство по эксплуатации

Страница: 225 / 601

DVP15MC11T Operation Manual
_8

The Bit-string data are converted into the Bit-string data as the following table shows.
Data type The value of In corresponds to the value of Out
In Out In Out
BYTE
WORD 16#00~16#FF 16#0000~16#00FF
DWORD 16#00~16#FF 16#0000_0000~16#0000_00FF
LWORD 16#00~16#FF
16#0000_0000_0000_0000~
16#0000_0000_0000_00FF
WORD
BYTE 16#**00~16#**FF 16#00~16#FF
DWORD 16#0000~16#FFFF 16#0000_0000~16#0000_FFFF
LWORD 16#0000~16#FFFF
16#0000_0000_0000_0000~
16#0000_0000_0000_FFFF
DWORD
BYTE 16#****_**00~16#****_**FF 16#00~16#FF
WORD 16#****_0000~16#****_FFFF 16#0000~16#FFFF
LWORD 16#0000_0000~16#FFFF_FFFF
16#0000_0000_0000_0000~
16#0000_0000_FFFF_FFFF
LWORD
BYTE
16#****_****_****_**00~
16#****_****_****_**FF
16#00~16#FF
WORD
16#****_****_****_0000~
16#****_****_****_FFFF
16#0000~16#FFFF
DWORD
16#****_****_0000_0000~
16#****_****_FFFF_FFFF
16#0000_0000~16#FFFF_FFFF

Bit string to Integer

The Bit-string data can be converted to the Integer data. And some instructions are shown
below.
The rule for the conversion of bit-string data into integer data is consistent with that for the
conversion of bit-string data into bit-string data.
The less-length data is converted to the greater-length data by writing the values of all bits of
the less-length data to corresponding bits of the greater-length data and setting the values of
the remaining bits of the greater-length data to 0.
Not c onv erted
1 0 1 0 1 1 0 1
* * * * * * * *
B it0 Bit7
In
Out
1 0 1 0 1 1 0 1
B it 8 B it15
WORD
BYTE
The greate r-d ata are conv erted
t o the les s-lengt h da ta
WO RD_ TO _BYTE
E N ENO
O ut In
BYTE_ TO _USINT
EN ENO
Out In
BYTE_ TO_ SINT
EN ENO
Out In
B YTE_TO_I NT
EN ENO
Out In
WORD_TO_I NT
EN ENO
Out In
8-154