Dell Qlogic QME8242, Руководство пользователя

Страница: 113 / 178

3–Adapter Management Applications
Windows Management Applications
CU0354602-00 A 3-53
For every test performed, the diagnostic utility shows the following data:
 Total number of attempts
 Number of successful completions
 Number of failures
You can either perform all tests in succession, or perform only specific tests
specified by the preceding command-line parameters.
You can run additional diagnostics in the CLI as listed in the following table. To
determine the
cna_port_inst
, issue the
qaucli -nic –i
command as
shown in Table 3-8 .
-L
---IntLB
Internal loopback test (default)
-H
--Hw
Hardware test (default)
-S
--LinkST
Link status test (default)
-nR
--noCRegs
No control registers test (combine –D or –a)
-nl
--noIRQS
No interrupt test (combine –D or –a)
-nL
--noIntLP
No internal loopback test (combine –D or –a)
-nH
--noHw
No hardware test (combine –D or –a)
-nS
--noLinkSt
No link status test (combine –D or –a)
-h
--help
View help text
Table 3-7. Windows QConvergeConsole CLI—Diagnostic Test
Commands (Continued)
Command Description