Dell Qlogic QME8242, Руководство пользователя

Страница: 38 / 178

2–Driver Installation and Configuration
Linux Driver Installation and Configuration
2-20 CU0354602-00 A
2. Rebuild the initrd image with driver by issuing the following command:
# mkinitrd -f initramfs-[kernel version].img `uname -r`
3. Reboot the host to boot from the new initrd image with new driver.
Installing the Linux FCoE Driver
This section provides procedures for installing the Linux FCoE driver for the
following operating systems:
 Building the Driver for RHEL 5.x Linux
 Building the Driver for RHEL 6.0 Linux
 Building the Driver for SLES 10 SP3 Linux
 Building the Driver for SLES 11 and SLES11 SP1 Linux
Building the Driver for RHEL 5.x Linux
1. In the directory that contains the source driver file,
qla2xxx-src-x.xx.xx.xx.xx.xx-k.gz
, issue the following
commands:
# tar -xzvf qla2xxx-src-x.xx.xx.xx.xx.xx-k.tar.gz
# cd qla2xxx-src-x.xx.xx.xx.xx.xx-k
2. Build and install the driver modules from the source code by executing the
build.sh
script as follows:
# ./extras/build.sh install
The
build.sh
script does the following:
 Builds the driver
.ko
files.
 Copies the
.ko
files to the appropriate
/lib/modules/2.6.../extra/qlgc-qla2xxx
directory.
3. Manually load the driver for Linux by issuing the following command:
# modprobe -v qla2xxx
To unload the driver, issue the following command:
# modprobe -r qla2xxx
NOTE:
Depending on the server hardware, the RAMDISK file name may be
different.