Dell Qlogic QME8242, Руководство пользователя

Страница: 122 / 178

3–Adapter Management Applications
Linux Management Applications
3-62 CU0354602-00 A
The self-test includes the following:
 Loopback test
 Interrupt test
 Link test
 Register test
Examples:
# ethtool -t eth8 offline
The test result is PASS
The test extra info:
Register_Test_on_offline 0
Link_Test_on_offline 0
Interrupt_Test_offline 0
Loopback_Test_offline 0
# ethtool -t eth4
The test result is PASS
The test extra info:
Register_Test_on_offline 0
Link_Test_on_offline 0
Interrupt_Test_offline 0
Loopback_Test_offline 0
Linux Diagnostic Test Descriptions
 Internal Loopback Test performs internal packet loopback.
 Flash Test verifies the Flash read and write.
 Hardware Test verifies that the hardware is running.
 Interrupt Test enables and disables the interrupt and functional verification
tests.
 Link Test verifies that the port is linked, meaning that the port has a good
cable attached to the port and that other end of the cable is connected to an
operational Ethernet port, either another NIC port or a network device, such
as a switch.
 Register Test verifies the NIC register read and write.
Linux Diagnostic Test Messages
Test information and PASS or FAIL messages are displayed for each of the tests
listed in
“Linux Diagnostic Test Descriptions” on page 3-62 .