Dell Qlogic QME8242, Руководство пользователя

Страница: 80 / 178

3–Adapter Management Applications
General Management with QConvergeConsole
3-20 CU0354602-00 A
Enabling CHAP Authentication with QConvergeConsole
You can enable CHAP authentication with either the interactive mode or
non-interactive mode of QConvergeConsole CLI. For details on the interactive
mode, refer to the
QConvergeConsole CLI User’s Guide . For the non-interactive
mode of the QConvergeConsole CLI, the following sections describes how to
enable CHAP:
 Configuring CHAP with QConvergeConsole CLI
 Linking to a CHAP Target
Configuring CHAP with QConvergeConsole CLI
To configure CHAP with QConvergeConsole CLI:
1. To add a primary and local CHAP entry (name and secret), issue the
-addchap
command to add a CHAP entry to the persistent CHAP table.
The positional parameters are
<hba_port_inst>
,
<CHAP name>
, and
<CHAP secret>
. The optional parameter is
[-BIDI]
indicating the CHAP
entry is a bidirectional entry (default is local CHAP). The adapter is reset
after this command is issued.
Command line options:
[-BIDI] -addchap <hba_port_inst> <CHAP name> <CHAP secret>
Examples:
In the following examples, the HBA port instance = 0, the CHAP name
= chapdbserver1, and the CHAP secret = k9Q038iaZwlqPplq012.
$qaucli -pr iscsi -addchap 0 chapdbserver1 k9Q038iaZwlqPplq012
Or:
$qaucli –iscsi -addchap 0 chapdbserver1 k9Q038iaZwlqPplq012
NOTE:
For an overview of the GUI version of QLogic’s QConvergeConsole utility,
see
Appendix C . Information on installing and starting the utility’s GUI
version is provided in the QConvergeConsole User's Guide . All procedural
information for the utility is covered in the online help system.
NOTE:
The iSCSI RFC Specification recommends a minimum CHAP secret
length of 12 bytes or characters. The maximum CHAP secret length for
QLogic iSCSI cards (the firmware limit) is 100 bytes or characters.