Dell Qlogic QME8242, Руководство пользователя

Страница: 121 / 178

3–Adapter Management Applications
Linux Management Applications
CU0354602-00 A 3-61
QConvergeConsole Diagnostics
QConvergeConsole CLI-based diagnostics include the following commands:
 To enable or disable the port beacon, issue the following command:
qaucli -pr nic -beacon [cna_port_inst] <on|off>
 To run an internal loopback test, issue the following command:
qaucli -pr nic -intloopback <cna_port_inst> <tests_num>
<on_error>
where
tests_num
is the number of tests (1–65535) and
on_error
is either
0
=Ignore or
1
=Abort
 To perform a Flash test, issue the following command:
qaucli -pr nic testflash [cna_port_inst]
 To perform a hardware test, issue the following command:
qaucli -pr nic -testhw [cna_port_inst]
 To perform an interrupt test, issue the following command:
qaucli -pr nic -testinterrupt [cna_port_inst]
 To perform a link test, issue the following command:
qaucli -pr nic -testlink [cna_port_inst]
 To perform a register test, issue the following command:
qaucli -pr nic -testregister [cna_port_inst]
 To display transceiver DMI data, issue the following command:
qaucli -pr nic -trans [cna_port_inst]
Ethtool Diagnostics
To perform an adapter self-test using ethtool-based diagnostics, issue the
following command:
# ethtool -t eth<x> offline
NOTE:
For an overview of the GUI version of QLogic’s QConvergeConsole utility,
see
Appendix C . Information on installing and starting the utility’s GUI
version is provided in the QConvergeConsole User's Guide . All procedural
information for the utility is covered in the online help system.