Dell Qlogic QME8242, Руководство пользователя

Страница: 132 / 178

4–Boot Configuration
Boot from SAN
4-6 CU0354602-00 A
7. If the system prompts you to update another drive , click BACK , and then
press ENTER.
The following message appears:
Make sure that CD number 1 is in your drive.
8. Insert the SLES CD #1 in the drive, and then click OK .
9. Follow the on-screen instructions to complete the installation.
ESX Boot from SAN
For VMware ESX only (does not apply to ESXi 4.x), follow these steps to install
the driver for devices as part of a new ESX installation.
1. Place the ESX installation DVD in the host DVD drive.
2. Restart the host.
3. Read and accept the terms of the license agreement.
4. Select a keyboard type.
5. When prompted for custom drivers, select Yes to install custom drivers.
6. To eject the ESX installation DVD, click Add .
7. Place the driver CD in the ESX host DVD drive.
8. Select the driver module from which to import drivers to the ESX host, and
then click
Next .
9. On the Load the system drivers? message box, click Yes .
10. After loading the driver module, continue installing ESX.
11. After the driver is installed, you are prompted to swap the driver CD with the
ESX installation DVD.
NOTE:
You will need the ESX installation DVD to begin.