Dell Qlogic QME8242, Руководство пользователя

Страница: 156 / 178

4–Boot Configuration
iBFT Boot Setup (iSCSI)
4-30 CU0354602-00 A
c. (Optional) Configure the Reverse CHAP Name and Reverse CHAP
Secret as needed.
Figure 4-21. Configuring Initiator Settings for IPv6 (Dynamic)
7. Press ESC to return to the Adapter Settings menu.
8. On the Adapter Settings menu, select Primary Target Settings and then
press ENTER.
9. Under Target Settings , configure the following, as shown in Figure 4-22 :
a. If the Target Param From DHCP was disabled in Step 6 , set the
Target Name , Target IP Address , Target Port , and Boot LUN to the
appropriate settings for the target setup.
b. (Optional) Specify the CHAP Type as one of the following:
 None to disable CHAP
 One-Way for a target-authenticating initiator
 Mutual to enable both target and initiator to authenticate each other
c. (Optional) Configure the Target CHAP Name and Target CHAP
Secret as needed.
NOTE:
The IPv6 address must be enclosed in a pair of square brackets
("[" and "]"). For example:
iscsi:[2001:1234:5678:0000:0000:0000:0000:abcd]:tcp:
3260:0:iqn.2008-09.com.iscsi:storage.tape.sys.xyz
The DHCPv6 server must use the QLogic enterprise number 3873.