Dell Qlogic QME8242, Руководство пользователя, Страница: 23 / 178

2–Driver Installation and Configuration
Windows Driver Installation and Configuration
CU0354602-00 A 2-5
Installing the Windows NIC Driver
After you extract the files from the archive, you can use them to do a Plug and
Play update or an installation. For example:
1. Start Windows Device Manager.
2. Right-click the NIC you want to update, and then select Update Driver .
3. Follow the directions in the Hardware Update Wizard to select the drivers
you extracted.
Installing the Windows iSCSI Driver
The QLogic iSCSI Adapter is a multifunction device. When installed in a Plug and
Play system, the operating system detects two functions for each adapter:
Network Controller and Ethernet Controller.
 The Network Controller refers to the iSCSI function.
 The Ethernet Controller refers to the NDIS function. Install the NDIS driver
only if you want to use the adapter as an Ethernet Controller.
This section provides the most common ways of installing and upgrading the
driver, as documented for each operating system.
 Initial OS installation with the iSCSI Adapter as Boot or as Add-On
 Adding the iSCSI Adapter to the Existing OS
 Updating the Existing Driver
Initial OS installation with the iSCSI Adapter as Boot or as Add-On
Refer to the appropriate procedure for your Windows 2003 or 2008 operating
system.
Windows Server 2003
NOTE:
For other installation procedures, consult the operating system
documentation.
NOTE:
You must apply the Microsoft Storport update before installing or upgrading
the driver. Windows Server 2003 SP2 (or later) requires Microsoft fixes
KB932755 and KB939315 (or later). Windows Server 2003 SP1 requires
Microsoft fixes KB932755 and KB939315 (or later). For Boot from SAN
installation, use the Windows 2003 SP2 first, and then apply the KB update.