Dell Qlogic QME8242, Руководство пользователя

Страница: 54 / 178

2–Driver Installation and Configuration
VMware Driver Installation and Configuration
2-36 CU0354602-00 A
2. Remove the existing VIB as follows:
# esxupdate remove -b <vibID>
 To uninstall from a remote host using the
vihostupdate
command:
1. From a console on the host where the vSphere CLI package is
installed or vMA is hosted, query to find the Bulletin ID of the existing
provider:
# vihostupdate.pl <conn_options> --query\
For example, the Bulletin ID may have a format similar to the following:
ESX/ESXi 4.0:
QLGC_NIC_PROVIDER-ESX-4.0.0-qlogic-nic-provider-
x.x.x
ESX/ESXi 4.1:
QLGC_NIC_PROVIDER-ESX-4.1.0-qlogic-nic-provider-
x.x.x
where x.x.x is the version number of the existing provider.
2. Remove the existing VIB as follows:
# vihostupdate.pl <conn_options> --remove --bulletin
<bulletinID>
Installing the QLogic Adapter vCenter Plug-in
 To install the QLogic Adapter vCenter Plug-in:
1. Run
QLogic_Adapter_VI_Plugin_x_x_x.exe
by either:
 Double-clicking the file name.
 Typing the name of the
EXE
on a command prompt.
2. Follow the instructions in the installer to complete the installation.
NOTE:
To uninstall the provider from a remote host using the
vihostupdate
command, make sure that the ESX/ESXi system is in Maintenance
Mode. To put the ESX/ESXi host in Maintenance Mode using the
vSphere Client, select
Inventory -> Host -> Enter Maintenance Mode .
NOTE:
For more details on
vihostupdate
, refer to the documents on
the VMware vSphere Command-Line Interface Documentation
page, located here:
http://www.vmware.com/support/developer/vcli/