Dell Qlogic QME8242, Руководство пользователя

Страница: 86 / 178

3–Adapter Management Applications
Windows Management Applications
3-26 CU0354602-00 A
Perform NPAR configuration using any of the following methods:
 OptROM
 Lifecycle controller
 Managements tools under various operating systems
After you have configured NPAR mode, you can modify the minimum and
maximum bandwidth per NPAR. The changes take effect immediately; no reboot
is required. The minimum and maximum bandwidths are specified as percentages
of the link bandwidth, where:
 Minimum bandwidth is the minimum guaranteed bandwidth to a partition.
 Maximum bandwidth is the maximum value that a partition is permitted to
use.
NPAR mode supports iSCSI Boot, FCoE Boot, and PXE Boot in their respective
partitions.
Windows Management Applications
Windows management applications for the QME8242 include the following:
 Windows NIC Driver Management Applications
 Windows Teaming
 Windows VLAN Configuration
 User Diagnostics for Windows NIC Driver Management Applications
Windows NIC Driver Management Applications
Overview
In the QConvergeConsole CLI (qaucli) utility, you can view VLAN and teaming
overview information by issuing the
qaucli –nt –zvt
command. (The qaucli is
an installation option available when you install the Windows drivers; see
“Windows Driver Installation and Configuration” on page 2-2 .)
Viewing and Changing Adapter Properties
This section provides information on using the QConvergeConsole CLI for:
 Viewing Adapter Properties
 Changing Adapter Properties
NOTE:
For additional information on configuring NPAR in the QConvergeConsole
utility, refer to the QConvergeConsole online help system.