Dell Qlogic QME8242, Руководство пользователя

Страница: 59 / 178

2–Driver Installation and Configuration
VMware Driver Installation and Configuration
CU0354602-00 A 2-41
7. On the User Input window, type your vCenter Server IP address, username,
and password, as well as the IP address of your local Tomcat server. Then
click
Next to continue.
8. On the Please Wait window, wait while the QLogic Adapter vCenter Plug-in
is configured for your system and registers the plug-in with the vCenter
Server.
9. On the Registration Result window, click Finish to complete the plug-in
installation.
Plug-in Unregistration from a Manual Install
If you have performed a manual installation of the vCenter plug-in, you must
perform a manual uninstall before running the vCenter installation wizard.
VMware provides two type of scripts for vCenter plug-in registration:
 For PowerShell scripting:
http://communities.vmware.com/docs/DOC-4521
 For Perl:
http://communities.vmware.com/docs/DOC-4530
1. Before you can use the script, download the appropriate VI SDK from
VMware.
For PowerShell, download vSphere PowerCLI:
http://communities.vmware.com/community/vmtn/vsphere/
automationtools/powercli
For Perl VI SDK, download vSphere SDK for Perl:
http://www.vmware.com/support/developer/viperltoolkit/
2. After you download and install the SDK and the registration script, follow
VMware instructions to register the vCenter plug-in.
For example, the Perl unregister command is:
perl registerPlugin.pl --server="127.0.0.1"
-username="administrator" --password="password"
--key="com.qlogic.QLogicAdapterVIPlugIn" --action="remove"
3. Replace the username and password with the correct information to log into
the vCenter Server.