Dell Qlogic QME8242, Руководство пользователя, Страница: 155 / 178

4–Boot Configuration
iBFT Boot Setup (iSCSI)
CU0354602-00 A 4-29
Figure 4-20. Configuring Adapter Settings for IPv6 (Dynamic)
5. Under Adapter Settings , select Initiator Settings , and then press ENTER.
6. Under Initiator Settings , configure the following, as shown in Figure 4-21 :
a. Set Enable DHCP to Enabled to obtain the address from IPv6 router
or the DHCPv6 server in this order:
i. The iBFT initiator first requests the IP address from the IPv6
router.
ii. If the IPv6 router indicates that a DHCPv6 server is also available
in the network, the initiator requests the IP address from the
DHCPv6 server.
iii. If the IPv6 router is not available, the initiator obtains the address
from the DHCPv6 server.
b. Set Target Param From DHCP to one of the following:
 Disabled to manually configure the Target Name , Target IP
Address , and Target Port , and Boot LUN (see Step 9 ).
 Enabled to automatically obtain target setting from the DHCP
server, which must provide the RootPath Option (option 17) to its
client. The option field string should have the following format:
iscsi:<server ip address>:tcp:<port number>:<LUN>:
<target name>