Dell Qlogic QME8242, Руководство пользователя

Страница: 53 / 178

2–Driver Installation and Configuration
VMware Driver Installation and Configuration
CU0354602-00 A 2-35
Subsequent Update Installation
 To update the QLogic Adapter CIM Provider after a prior VIB installation:
1. Follow the instructions in “Removing the QLogic Adapter CIM
Provider” on page 2-35 to remove the existing VIB.
2. Follow the instructions in “Initial Installation” on page 2-34 to install the
new VIB.
Starting the QLogic Adapter CIM Provider
After a system startup, the Small Footprint CIM Broker (SFCB) CIM object
manager (CIMOM) in the ESX system should start automatically and load the
QLogic Adapter CIM Provider when necessary.
For ESX systems, you can also manually stop, start, or restart the SFCB CIMOM
by issuing the following commands.
 To stop the SFCB CIMOM and the QLogic Adapter CIM Provider:
# /etc/init.d/sfcbd-watchdog stop
 To start the SFCB CIMOM and the QLogic Adapter CIM Provider:
# /etc/init.d/sfcbd-watchdog start
 To restart the SFCB CIMOM and the QLogic Adapter CIM Provider:
# /etc/init.d/sfcbd-watchdog restart
After starting the SFCB CIMOM, use a CIM client utility to query the QLogic
Adapter CIM Provider for information.
Removing the QLogic Adapter CIM Provider
To remove the QLogic Adapter CIM Provider, use either the
esxupdate
or
vihostupdate
command.
 To uninstall the QLogic Adapter CIM Provider using the
esxupdate
command:
1. Query and find the existing VIB you are updating as follows:
# esxupdate query --vib-view | grep qlogic
For example, the VIB ID may have a format similar to the following:
ESX/ESXi 4.0: cross_qlogic-nic-provider_400. x.x.x -000000
ESX/ESXi 4.1: cross_qlogic-nic-provider_410. x.x.x -000000
where x.x.x is the version number of the existing provider.