Dell Qlogic QME8242, Руководство пользователя

Страница: 36 / 178

2–Driver Installation and Configuration
Linux Driver Installation and Configuration
2-18 CU0354602-00 A
2. To create a backup copy of the RAM disk image, issue the following
commands:
# cd /boot
# cp initrd-[kernel version].img initrd-[kernel
version].img.bak
3. Rebuild the initrd image by issuing the following commands:
# mkinitrd
4. Reboot the host to boot from the new initrd image with the new driver.
Building the iSCSI Adapter Driver for RHEL 6.0 and SLES 11 SP1
Building and Installing the Adapter Driver
1. In the directory that contains the source driver file,
qla4xxx-src-vx.xx.xx.xx.xx.xx-k.tar.gz
, issue the following
commands:
# tar -xzvf qla4xxx-vx.xx.xx.xx.xx.xx-cx.tar.gz
# cd qla4xxx-vx.xx.xx.xx.xx.xx-cx
2. Build and install the driver modules from the source code by executing the
build.sh
script as follows:
# ./extras/build.sh install
The
build.sh
script does the following:
 Builds the driver
.ko
files
 Copies the
.ko
files to the appropriate directory:
/lib/modules/2.6.../updates
 Adds the appropriate directive in the
modprobe.conf
file (if
applicable)
NOTE:
For SLES 11, edit the
/etc/modprobe.d/unsupported_modules
file to make the following change:
allow_unsupported_modules 1
(replace
0
by
1
)
NOTE:
Depending on the server hardware, the RAMDISK file name may be
different.