Dell Qlogic QME8242, Руководство пользователя

Страница: 37 / 178

2–Driver Installation and Configuration
Linux Driver Installation and Configuration
CU0354602-00 A 2-19
Manually Loading the Adapter Driver
1. To load the driver, use one of the following methods:
 To load the driver directly from the local build directories, issue the
following commands:
# insmod /lib/modules/2.6.../kernel/drivers/scsi/
scsi_transport_iscsi.ko
# insmod /lib/modules/2.6.../updates/qla4xxx.ko
 To load the driver using modprobe, issue the following command:
# modprobe -v qla4xxx
2. To load the qisioctl module, issue the following command:
# modprobe -v qisioctl
3. Start the iqlremote daemon by issuing the following command:
# service iqlremote start
Unloading the Adapter Driver
To replace an existing inbox driver with a new out-of-box iSCSI driver, unload the
existing driver and load the new driver, qisioctl module and iqlremote daemon. To
unload the driver, stop all applications using the driver, and then unload the driver.
1. Stop the iqlremote daemon by issuing the following commands:
# service iqlremote stop
2. Unload the qisioctl module, using the modprobe command as follows:
# modprobe -r qisioctl
3. To unload the driver using modprobe, issue the following command:
# modprobe -r qla4xxx
Rebuilding the RAM Disk
To automatically load the driver by rebuilding the RAM disk to include the driver,
follow these steps:
1. To create a backup copy of the RAM disk image, issue the following command:
# cd /boot
# cp initramfs-[kernel version].img initramfs-[kernel
version].img.bak