Dell Qlogic QME8242, Руководство пользователя

Страница: 25 / 178

2–Driver Installation and Configuration
Windows Driver Installation and Configuration
CU0354602-00 A 2-7
Adding the iSCSI Adapter to the Existing OS
To add the iSCSI Adapter driver to an existing Windows system, follow the
appropriate procedure for your Windows platform.
Windows 2003
This procedure requires extracting the driver to a folder on the hard drive and
configuring it with the latest service pack and Windows updates. iSCSI adapters
are Plug and Play devices that are compatible with your computer.
1. Insert the iSCSI adapter in the appropriate slot in the computer according to
the device manufacturer’s instructions.
2. Restart or turn on your computer.
When the computer starts, Windows detects the newly installed iSCSI
adapter and displays the message
Found New Hardware with Fibre
Channel Controller . The Found New Hardware wizard program starts
installing a device driver for the newly installed adapter.
3. Insert the QLogic software diskette into drive A.
4. Select Install the software automatically (Recommended) , and then click
Next .
5. On the Completing the Found New Hardware Wizard, click Finish .
6. If Windows displays the message System Settings Change , Windows has
finished installing a new adapter.
The software that supports your adapter requires that you restart the
computer. You must restart the computer before the new settings will take
effect. The message
Do you want to restart your computer now?
appears.
7. Click Yes to restart the computer right away.
Windows Server 2008
1. Connect the device to the appropriate slot on your computer according to
the device manufacturer’s instructions.
2. Restart or turn on your computer.
NOTE:
If Windows Server 2003 automatically installs the driver for the newly added
iSCSI adapter upon startup, without prompting you for a selection (for
example, Windows Server 2003 installs an inbox driver), go to
“Updating the
Existing Driver” on page 2-8 .