Dell Qlogic QME8242, Руководство пользователя

Страница: 129 / 178

4–Boot Configuration
Boot from SAN
CU0354602-00 A 4-3
3. In the selection list, do the following:
a. In the first box, click Converged Network Adapters or iSCSI Adapters .
b. In the second box, click your adapter model number.
c. In the third box, click your Windows platform.
d. Click the Go button.
4. Under Drivers , click the download link for the appropriate driver.
5. Read the license agreement, and then click Agree .
6. When prompted, select to save the driver to a temporary location on the
hard drive.
7. For a Boot from SAN installation, save the driver on the appropriate media
(floppy disk or USB flash drive, for example).
8. Run the self-extracting file you just downloaded and enter a temporary
directory in the
Unzip to folder box. (If the final driver package is not saved
in an
.EXE
format, this step is not required.)
9. Right-click the driver to extract the driver files to the temporary location.
Windows 2003 Boot from SAN
For Windows 2003, follow these steps to perform an initial OS installation with the
QLogic QME8242 adapter as boot or as add-on.
1. Start the Windows installation procedure using the setup CD.
2. Press F6 when the following message appears:
Press F6 if you want to install a third-party SCSI or RAID driver....
After all the standard devices have been loaded, press S to Specify
Additional Device.
3. Insert the QLogic driver diskette and press ENTER.
4. Select the QLogic FCoE Adapter or iSCSI Adapter, and then press ENTER.
5. For Windows Server 2003, press S to use the driver on the floppy drive.
The following message appears:
Setup will load support for the following mass storage devices.
QLogic FCoE Adapter. [or iSCSI Adapter]
Press Enter=Continue.
NOTE:
The following procedure requires a driver disk; see “Creating a Driver Disk”
on page 4-2 .