Dell Qlogic QME8242, Руководство пользователя

Страница: 26 / 178

2–Driver Installation and Configuration
Windows Driver Installation and Configuration
2-8 CU0354602-00 A
When your computer comes up, Windows detects the newly-installed device
and displays the message
Found New Hardware with Ethernet
Controller . The Found New Hardware wizard program starts installing a
device driver for the newly-installed adapter.
3. Click I don't have the disc. Show me other options , and then click
Browse my computer for driver software (advanced) .
4. On the Browse for driver software window:
a. Do one of the following:
 Type
A:\
 Choose the folder where the extracted driver files are located
b. Click Next .
Windows displays a message, letting you know it has finished installing the
driver for this device.
5. To complete the Found New Hardware wizard, click Close .
6. If the system displays the following prompt, click Yes to restart the computer
immediately:
System Settings Change. Windows has finished installing a new
device. You must restart your computer before the settings will take
effect. Do you want to restart your computer now?
Updating the Existing Driver
To install an updated version of the driver, follow the appropriate procedure for
your Windows version.
Windows 2003
1. Start the Device Manager as follows:
a. Click Start and then click Run .
b. In the Open dialog box, type
devmgmt.msc
, and then press ENTER.
2. Use the scroll bar to scroll down the list of hardware types, and then double-click
the SCSI and RAID controllers.
3. In the devices list, double-click QLogic iSCSI Adapter .
4. Select the Driver tab, and then click Update Driver to start the Hardware
Update Wizard.
5. Select Install from a list or specific location (Advanced) and then click Next .
6. Select Don't search I will choose the driver to install and then click Next .
7. Click Have Disk and then navigate to the folder containing the extracted driver.